How to Crochet a Granny Stripe Pillow Cover (Beginner-Friendly)

1. 1

   Step 1: Chain a Foundation Row in Multiples of Three

   Watch this step · 0:19

   Enlarge

   Grab your worsted-weight yarn in three or more colors (Bella Coco uses Stylecraft Special DK in Plum, Wisteria, and Clematis), a 4mm crochet hook, scissors, and a darning needle. For a 16-inch pillow front, chain a multiple of 3 - aim for about 78 stitches across, then add 2 more chains for the turning corner.

   Those two extra chains will become the corner space for your first cluster. If you want an 18-inch pillow instead, chain about 87 stitches plus 2. Loose, even chains make the next row easier; pull them tight and you'll fight the foundation row.

   Tip:

   Pillow covers crochet up best about 1 inch smaller than the form on each side. The natural stretch of granny stripe gives you a snug, plumped finished look.

   Mark step done

   Used in this step5.5mm Aluminum Crochet Hook SetLion Brand Vanna's Choice Worsted Yarn (assorted colors)16-inch Pillow Form Insert

   Back to all steps

2. 2

   Step 2: Work the Single-Crochet Foundation Row Back Across the Chain

   Watch this step · 2:05

   Enlarge

   Bella Coco calls this double crochet because she uses UK terms - in US terms it's single crochet. Skip the first two chains closest to your hook, insert into the next chain, yarn over, pull through, yarn over, pull through both loops. That's one single crochet.

   Repeat all the way along the chain. Don't pull tight - looser stitches make row two much easier. The work will spiral as you go. Ignore it. By row three it straightens out completely.

   Mark step done

   Back to all steps

3. 3

   Step 3: Set Up Row Two With the First Treble Cluster

   Watch this step · 4:50

   Enlarge

   Chain 3 and turn the work. That chain-3 counts as your first treble (US double crochet). Yarn over, insert into the very first chain space, and work one more treble - now you have a pair of trebles in the corner.

   From here on, the granny stripe rhythm kicks in. Skip the next two stitches, work a cluster of three trebles into the next chain space. Skip two, cluster of three into the next gap. Skip two, cluster. The fabric starts to take shape as little fans of yarn separated by tiny windows.

   Mark step done

   Back to all steps

4. 4

   Step 4: Continue Three-Treble Clusters Across the Row

   Watch this step · 6:45

   Enlarge

   One treble: yarn over, insert, pull through, pull through two, pull through two. Three of those into the same space = one cluster. Skip the next two stitches, work the next cluster in the next gap.

   Keep an even tension across the row and the fabric flattens out beautifully. When you reach the last three chains at the end, work just two trebles into the very last chain to balance the corner you made at the start.

   Mark step done

   Used in this stepClover Amour Crochet Hook Set

   Back to all steps
5. 5

   Step 5: Alternate the Edge Pattern in Rows Three, Four, and Five

   Watch this step · 9:57

   Enlarge

   Chain 3, turn, and work just one treble into the first gap. Not two. Row 2 starts with two trebles, row 3 starts with one, row 4 starts with two again. This 2-1-2-1 alternation across rows is what keeps both side edges straight instead of stepped.

   Work clusters of three trebles into every gap across the row exactly as before. End the row with a single treble worked into the top of the chain-3 from the previous row to balance the opposite edge. Two rows of practice and the rhythm becomes automatic.

   Mark step done

   Back to all steps

6. 6

   Step 6: Change Colors to Start Your Next Stripe

   Watch this step · 14:30

   Enlarge

   At the end of a row, cut the old yarn leaving a 6-inch tail and pull the loop through to fasten off. Insert your hook into the first chain space of the new row, loop your new color over the hook, pull it through, and tie a small knot to anchor it. Slip-stitch into the same space, then chain 3 to start the next turning post.

   Carry on with clusters in the new color. Bella Coco swaps colors every two rows for a tight stripe; spacing every 3 rows reads taller and a single-row stripe reads like confetti. The choice is yours - granny stripe is forgiving with whatever color rhythm you pick.

   Tip:

   Weave in the color-change tails as you go rather than at the end. Twenty stripes means forty tails and that's a slog to do all at once.

   Mark step done

   Used in this stepBamboo Stitch Markers (set of 20)

   Back to all steps

7. 7

   Step 7: Keep Adding Stripes Until the Panel Hits Pillow Size

   Watch this step · 16:25

   Enlarge

   Crochet stripe after stripe until the front panel measures 16 inches square (or 18 inches for an 18-inch form). For a tight, plumped look, aim for a panel about 1 inch smaller than the form on each side - the granny stripe stretch handles the rest.

   Block the finished panel lightly with steam or a damp towel so the rows lie flat and the corners square up. Weave in all your color-change tails with the darning needle before you join the panels. A neat back is a happy pillow.

   Mark step done

   Used in this stepChibi Bent-Tip Yarn Needle SetFiskars Fabric Scissors

   Back to all steps

8. 8

   Step 8: Make the Back, Join the Panels, and Insert the Pillow Form

   Watch this step · 16:40

   Enlarge

   Make a second granny stripe panel the same size for the back, or cut a piece of cotton fabric to match for a lighter, flatter back. Place the two panels together with the right sides facing out, line up the corners, and join three sides with single crochet through both layers - or whip-stitch the seams with a darning needle for a nearly invisible finish.

   Slide your pillow form through the open fourth side. To close: either single-crochet the last edge shut for a permanent cover, or sew three small wooden buttons along one edge of the front and work matching button-holes on the back for a removable, washable version.

   If you want to make a coordinating throw to drape over the same couch, the matching granny stripe blanket tutorial uses the exact same stitch pattern at blanket scale.

   Tip:

   A removable cover is worth the extra five minutes for the buttonholes - yarn pillows attract every bit of cat hair and crumb on the couch and you'll want to be able to throw the cover in the wash.

   Mark step done

   Used in this stepWooden Buttons (set of 12, 1-inch)18-inch Pillow Form Insert

   Back to all steps

Keep going

How to Crochet a Sphere (Beginner Amigurumi Ball)

→

Tools we recommend

• Clover

  Clover Amour Crochet Hook Set (10 sizes)

  Soft, easy-grip handles that warm to the touch and a full size range in one case. The set most crocheters upgrade to and never look back.

• Lion Brand

  Lion Brand 24/7 Cotton Yarn

  Mercerized cotton with crisp stitch definition and a subtle sheen. Machine washable, and the go-to for amigurumi, bags, and dishcloths.

• Clover

  Clover Locking Stitch Markers (20-pack)

  Lock onto stitches so they never slip while you mark rounds, increases, and repeats. A dollar-store fix that actually holds.

Tags