How to Do an Acrylic Pour Painting

The finished result: How to Do an Acrylic Pour Painting
  • Difficulty: Easy
  • About 45 minutes, plus 24 hours to dry or set
  • 10 steps

You tapped Save

Save this project for later

We'll email you a link, no password.

How to Do an Acrylic Pour Painting

  • Your saved projects in one list
  • Your ticked steps on any device

Check your inbox for an email from us. Not there? Look in your spam folder.

Print

Steps written out by Crafting Step by Step from Kristen // k.becca's video (opens YouTube) (10:07). Published .

Also in:Crafts

Acrylic pouring looks like it needs a shelf of specialist supplies. It does not. Kristen from KBecca mixes her own pouring medium from white glue and water, and uses ordinary craft paint from whatever brand is on sale.

The one number worth remembering is the consistency: buttermilk. Thinner and the colours vanish into each other, thicker and they will not move when you tilt the panel. Everything else about a pour is deliberately out of your control, which is most of the fun.

Free printable

Print the steps and supply list for this project

One page you can take to the table. Free with a free account, no password.

Get the free printable

What you'll need

Free, for this project

Get this checklist by email

  • All 10 tools and materials, with tick boxes
  • A link to print all 10 steps on paper, to keep by you while you craft

No password. The whole tutorial stays free on this page.

Quick answer

Acrylic pouring from scratch: mix your own pouring medium from glue and water, pour onto a raised panel, then tilt to guide the paint into cells. An easy project: about 45 minutes, plus 24 hours to dry or set. Materials cost about $15 to $30. You need 10 things, including Craft acrylic paint, White school glue and Water. The 10 steps start with cover Everything, pick Your Paint, make the Pouring Medium and mix It Four to Eight.

Step-by-step guide

10 steps, about 10 minutes. Tap a picture to jump to that step. Your progress saves automatically.

Tick each step off as you go.

  1. Step 1: Cover Everything

    Watch this step · 0:55

    Acrylic pouring is messy by design, so protect the surface first with a bin bag, drop cloth or old newspaper.

    Sit a shallow tray underneath the work as well. It catches the run-off and makes packing away far quicker.

    Tip:

    Trays come in packs of two cheaply. Worth it if you do not have a dedicated space for this.

    Back to all steps

  2. Step 3: Make the Pouring Medium

    Watch this step · 3:20

    Rather than buying a dedicated pouring medium, mix your own from white school glue and water.

    It behaves the same for a fraction of the cost, which matters because a pour uses a surprising amount of it.

    Tip:

    Distilled water is the purist choice, but tap water works fine unless you want the piece to last decades.

    Back to all steps

  3. Step 4: Mix It Four to Eight

    Watch this step · 4:05

    Fill your bottle to the 4 ounce mark with glue, then top it up to the 8 ounce mark with water.

    Cap it and shake until there are no streaks. Make more than you think you need - every colour draws on it.

    Back to all steps

  4. Step 6: Mix to Buttermilk

    Watch this step · 5:35

    Keep adding medium until the paint runs like buttermilk off the stick.

    It usually lands close to a one-to-one ratio of paint to medium, but go by how it flows rather than the measurement.

    Tip:

    This is the step that decides whether the pour works. Too thick and nothing moves when you tilt.

    Back to all steps

  5. Step 7: Raise the Panel

    Watch this step · 6:58

    Set your canvas panel on four shot glasses, one at each corner, inside the tray.

    Lifting it clear lets the paint run off all four edges instead of pooling underneath and gluing the panel down.

    Back to all steps

  6. Step 9: Tilt to Guide It

    Watch this step · 7:50

    Lift the panel and tip it so the paint starts travelling. Work it toward each corner in turn until the whole surface is covered.

    You never fully control a pour. You steer it, and the paint does the rest.

    Tip:

    Paint runs off the edges quickly once you start tilting, so keep the tray underneath and do not chase every gap.

    Back to all steps

  7. Step 10: Spritz for Cells

    Watch this step · 9:12

    Spray isopropyl alcohol over any bubbles you can see. It pops them and leaves extra texture where it hits the wet paint.

    If you would rather not have that effect, spray the alcohol into the air above the piece instead and let it settle.

    Back to all steps

How to Paint with a Palette Knife

Keep going

How to Paint with a Palette Knife

Keep going with painting

More on this topic, picked for this acrylic pour painting.

You reached the last step

Save this project to come back to it

Your ticked steps, the free printable and your other saved makes, together in My Projects. Free, no password.

You tapped Save

Save this project for later

We'll email you a link, no password.

How to Do an Acrylic Pour Painting

  • Your saved projects in one list
  • Your ticked steps on any device

Check your inbox for an email from us. Not there? Look in your spam folder.

Free printable

Printable sheet and shopping list for this project

The bonus is hidden until you sign up.

Free with a free account, no password. Every step above stays open to everyone.

Products Used

The Checklist

How to Do an Acrylic Pour Painting

Tools
5
Materials
5
Steps
10
Video
10 min

Tools we recommend

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Crafting Step by Step.

Tags

The Crafter's Weekly

New painting tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Test your knowledge

Did the lesson stick? Start with this one.

5 questions covering what you just read. No signup, no score saved, and you can stop after this one.

Question 1 of 5

What can you use instead of a bought pouring medium?

Quick reference

Key takeaways from How to Do an Acrylic Pour Painting

5 questions, answers, and one-line explanations. Tap to expand.

  1. 1.What can you use instead of a bought pouring medium?

    Answer: White school glue and water

    It behaves the same as the bought stuff at a fraction of the cost.

  2. 2.What is the glue-to-water ratio for the homemade medium?

    Answer: Four parts glue to four parts water

    Fill the bottle to 4 ounces with glue, then top up to the 8 ounce mark.

  3. 3.How should the thinned paint flow off the stick?

    Answer: Like buttermilk

    Go by how it flows rather than by the measured ratio.

  4. 4.Why raise the panel on shot glasses?

    Answer: So paint runs off all four edges

    Paint pooling underneath glues the panel down to the tray.

  5. 5.What does spraying isopropyl alcohol on a wet pour do?

    Answer: Pops bubbles and leaves texture

    Spray it into the air above instead if you would rather skip the cell effect.

Did this work for you?

What's next

Related collections

Curated theme pages that include this tutorial.

Similar tutorials

Hand-picked next reads based on the one you just finished.

Liked this painting tutorial?

Pick the crafts you want to hear about. One email every Sunday with new step-by-step tutorials. No spam, easy to unsubscribe.

Get more like this in your inbox

Weekly digest. Pick the categories you want. Unsubscribe anytime.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.