Resin Craft Starter

Learning Path

Resin Craft Starter

This course is for crafters who want to try resin and get it right the first time, without sticky spots, cloudy pieces or a mess on the table. You start by learning to measure and mix two-part epoxy resin slowly so it cures clear, then how to prepare silicone molds, pour, and get clean pieces out. From there you make a set of resin coasters with wood inlays, learn three ways to color resin with pigment ink, alcohol ink and mica powder, and finish with keychains filled with glitter, beads or dried flowers. You will need two-part epoxy resin, measuring and mixing cups, wooden stir sticks, silicone molds, a silicone mat to protect your table, and a small torch or lighter to pop bubbles. Safety gear matters with resin: wear nitrile gloves and a respirator mask rated for organic vapors, and work in a room you can air out with an open window or a fan. Expect to spend roughly $20 to $50 on supplies to get started. Hands-on time adds up to a little over three hours, but each pour then needs half a day to a full day to cure, so this course works best spread over a week or two. Afterward, try a trinket dish, bookmarks or a suncatcher.

5 tutorials~56 minmedium

Your progress

0 of 5 completed
How to Mix Epoxy Resin (Beginner's Step-by-Step)How to Use Resin Molds (Beginner Casting Guide)How to Make Resin Coasters: 7 Step DIY Tutorial With Wood InlaysHow to Add Color to ResinHow to Make Resin Keychains (Beginner Mod Podge Resin)

Tutorials in this path

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5