By CraftingStepByStepPublished
Based on a video by Art for Kids Hub.
A cartoon mug of hot chocolate is a cozy winter drawing that kids love, because it gets a face. Two of them, in fact, plus two marshmallow buddies floating on top. This version comes from Art for Kids Hub, where a dad and his son draw side by side. You start with the hot chocolate, add the marshmallows and a striped straw, build the mug around them, then color it. Plan on about ten minutes.
You need a black marker, paper and something to color with.
Most people draw the cup first and then try to squeeze things into it. This lesson works the other way. You draw the drink, the marshmallows and the straw first. Then the mug rim and sides go around them, and any line that would cross a marshmallow stops and picks up on the other side. That trick is called overlapping. It makes the marshmallows look like they sit in front, and it saves you from erasing.
A fine point black permanent marker gives the bold cartoon outline you see in the video. Printer paper is fine for practice. For a piece you want to keep, a heavier drawing pad stops markers from bleeding through. The video colors with colored pencils, and the creators point out that crayons, markers or oil pastels work too. Washable markers are the fastest pick for little kids.
Draw big. Put the first curve in the middle of the page and make it about as wide as your hand. A mug that fills the sheet is much easier to color.
The video mug is teal with a red and white straw, but you can pick any colors. Here are a few ways to change it up:
Fold a piece of cardstock in half and draw a small mug on the front for a winter card. Cut a mini one out, punch a hole and tie it to a present; our Christmas gift tags guide has more ideas. A finished drawing also looks great taped to a classroom window next to a snowman drawing. And when the art is done, a real mug of homemade hot chocolate makes a good reward.
New to drawing? Start with how to draw for the basics.
10 steps · about 8 minutes.Check off each step as you go and your progress saves automatically.
Find the middle of your paper. Draw a wide curve that dips down and comes back up, like a big smile. This is the front edge of the hot chocolate inside the mug. Make it about as wide as your hand. Everything else in the drawing, from the marshmallows to the cup, gets built around this one line.
Tip
Keep the curve in the center of the page. You need room below it for the mug and above it for the steam.
Right above the curve, draw a line that goes up, over and down. Connect the bottom with a small curve. That is your first marshmallow. Now draw a second one beside it, tucked behind the first. Start its line where it touches the first marshmallow so it overlaps. Add a little curve on top of each one so they look 3D.
Tip
Round the corners a bit. Soft corners make them read as marshmallows instead of ice cubes.
On the front marshmallow, draw two small eyes set far apart and a big U for an open mouth. Color the top of the mouth and leave the bottom white. On the back marshmallow, draw two upside-down U shapes for closed, happy eyes and a small smile. Every face can be different. Silly is the goal here.
Tip
Keep the faces low on each marshmallow so there is room for the 3D curve on top.
Beside the marshmallows, draw a long line that comes down into the hot chocolate. Draw a second line right next to it going the same direction. Close the bottom with a small half circle and the top with a squished oval. Then add curved stripes down the straw. With red stripes, it looks like a candy cane.
Tip
Tilt the straw a little. A slanted straw looks more natural than one standing straight up.
Go back to your first curve. Imagine it going behind the marshmallows and the straw. Draw the same curve coming out on the far side, then bring it around and connect it to where you started. Now the hot chocolate is a flat oval with the marshmallows and the straw floating in it.
Tip
Stop the line wherever it hits a marshmallow or the straw, then start again on the other side.
Draw another curve above the hot chocolate oval for the rim of the cup. Let it go behind the straw. Then pull a line down from each side of the rim, curving in a little toward the bottom. Connect the two sides with a curve at the base. The gap between the rim and the drink shows the hot chocolate sits lower than the top.
Tip
Make the mug tall enough to fit a face. About twice as tall as the marshmallows works well.
The mug needs a handle. Start near the top of the right side and draw a big backward C shape that curves out and comes back into the cup lower down. Then draw a smaller backward C inside it. The space between the two lines is the thickness of the handle, so keep a nice wide gap.
Tip
A chunky handle looks more cartoon and is easier to color than a thin one.
Draw two circles on the front of the mug for eyes. Inside each, draw a small circle at the top right and a smaller one at the bottom left. Color the big circles in and leave the small ones white so the eyes look shiny. Then draw a short line between the eyes and a big U for an open mouth with a little tongue.
Tip
Keep the face low on the mug, below the hot chocolate line, so it does not crowd the marshmallows.
Above the mug, draw a small swirl that curls up, loops around and comes back down. That wisp of steam tells everyone the hot chocolate is warm. One swirl is enough for a cartoon look. If you want more, add a second smaller one beside it. That finishes the line drawing.
Tip
Leave a little space between the steam and the rim so it looks like it is floating up.
Pick your colors. In the video, both mugs are teal with brown hot chocolate, white marshmallows, a red and white straw and pink cheeks. Use colored pencils, markers, crayons or oil pastels. Color the drink brown first, then fill in the mug around the face. Leave the marshmallows and the eye highlights white.
Tip
Two small pink circles under the eyes make the face look extra cute.
Keep going
How to Draw a Moose
How to Draw Hot Chocolate
E6000
E6000 Craft Adhesive, Clear (3.7 oz)
The industrial-strength craft glue that bonds glass, wood, ceramic, metal, fabric, and concrete. The one adhesive most craft projects reach for.
Gorilla
Gorilla Dual-Temp Full-Size Hot Glue Gun
Dual-temp so it handles delicate florals and heavy materials alike. A precise nozzle and built-in stand make it the everyday craft-table gun.
OLFA
OLFA 18" x 24" Self-Healing Cutting Mat
The pro-standard cutting surface. Gridlines for square cuts, self-healing so blades never leave grooves, and big enough for paper, fabric, and leather.
As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support CraftingStepByStep.
Sunday How-To
One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.
Did this work for you?
Curated theme pages that include this tutorial.
Hand-picked next reads based on the one you just finished.
Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.
Send me tutorials about
