Crafting Step by Step

How to Make Half-Square Triangles: 6 Easy HST Methods

Source: Just Get it Done Quilts • Full tutorial: www.craftingstepbystep.com/quilting/how-to-make-half-square-triangles

Difficulty
Medium
Hands-on time
About 1 hour
Cost
About $5 to $10

Tools

  • Rotary cutter
  • Self-healing cutting mat
  • Acrylic ruler (6.5 inch)
  • Sewing machine
  • Iron

Materials

  • Coordinating fabric squares (2 colors)
  • Thread
  • Water-soluble marking pen
  • Triangle paper (optional)

Steps

  1. 1. Method 1: Classic 1-at-a-Time

    The most direct method. Cut a square the finished size of your HST plus seven-eighths of an inch, then slice it diagonally corner to corner.

    Tip: If you're making a scrappy quilt with no two HSTs alike, this is your method - every square can pair with a different partner.

  2. 2. Method 2: The Workhorse 2-at-a-Time

    Stack two squares right sides together. Mark the diagonal across the top square with a water-soluble pen or use a half-inch ruler to mark both stitching lines.

    Tip: A strip of low-tack washi tape on the bed of the machine gives you a ledge to butt against, replacing the missing presser-foot edge guide.

  3. 3. Method 3: Sew On the Line for Pre-Cuts

    Made for charm packs, mini charms, and any pre-cut you don't want to recut. Stack two squares right sides together, mark the diagonal, and sew directly on the line.

  4. 4. Method 4: Magic 8 for Bulk Production

    When you need eight identical HSTs at once. Stack two squares right sides together with both squares cut four times larger than your finished HST size.

    Tip: For beginners, add a full inch to your starting square size rather than the standard seven-eighths.

  5. 5. Method 5: Easy Angle Ruler for Jelly Roll Strips

    The Easy Angle is a specialty triangle ruler designed for strip cutting. Lay a fabric strip flat and align the ruler so its height matches the strip width.

  6. 6. Method 6: Triangle Paper for Precision

    Triangle paper has the stitching lines and cutting lines printed on it. Pin a sheet to two stacked fabric squares, right sides together.

    Tip: Crease along the stitching lines before you tear the paper. The paper releases at the perforation, and the seam stays put.

  7. 7. Which Method Goes With Which Project

    Pick by project, not by habit. For everyday quilt blocks where you need two matching HSTs, the 2-at-a-time method is the right default.

    Tip: When in doubt, default to 2-at-a-time. It's the most forgiving, the most accurate without specialty tools, and works for almost every block you'll ever make.

My notes

Scan for the full tutorial and video

Full tutorial with videos and details at www.craftingstepbystep.com/quilting/how-to-make-half-square-triangles