How to Paint a Gourd to Look Like Raku Pottery
Source: Jenn Avery Gourd Art • Full tutorial: www.craftingstepbystep.com/painting/how-to-paint-a-gourd
- Difficulty
- Easy
- Hands-on time
- About 1 hour
- Wait time
- 2 hours
- Cost
- About $8 to $20
- Makes
- 1 painted gourd
Tools
- soft paint brushes (one per color)
- palette paper
- paper towels
Materials
- cleaned dried gourd
- black acrylic paint or black gesso
- Pearl Ex mica pigment powders
- UV resistant clear spray, gloss or matte
Steps
1. Choose Pearl Ex Pigments for a Raku-Look Gourd
Look at a few photos of real raku pottery and note the colors that catch your eye. Coppers, blues, purples and a touch of gold are classic.
Tip: Loose powdered eyeshadow with fine shimmer works the same way as mica pigment.

2. Base Coat the Cleaned Gourd Black and Set Out Your Pigments
Start with a cut, cleaned gourd and give it a full coat of black acrylic paint. Let it dry completely.
Tip: A thick black gesso covers in one coat and dries to a matte surface.

3. Brush Wet Black Gesso on One Section of the Gourd
Hold the gourd in one hand and brush a second coat of black onto one area only, about the size of your palm. This wet layer is the glue for the pigments.
Tip: If a section dries before you get to it, brush on a little more black.

4. Dab Antique Copper Pigment Into the Wet Black Paint
Load a soft brush with antique copper pigment and dab it onto the wet black section. Do not brush it around.
Tip: Tap excess powder off the brush over the jar to waste less pigment.

5. Add Blue Russet and Red Tones to the Gourd With a Clean Brush
Switch to a fresh brush and dab blue russet next to the copper, then a little red russet. Overlap the edges a bit so the colors melt into each other.
Tip: A new brush for each color keeps every shade clear instead of muddy.

6. Dab Aztec Gold Pigment on the Next Wet Section of the Gourd
Brush black over the next section and dab in Aztec gold while it is wet. Gold reads as the flash of metal you see on fired raku, so small touches go a long way.
Tip: Turn the gourd as you go so you always work on the side facing you.

7. Cover the Whole Gourd With Duo Blue Green Pigment
Keep working around the gourd, section by section, adding color as you go. Duo blue green shifts between teal and purple as the light moves, which gives the finish depth.
Tip: Step back and look from a distance. Fill any big plain gaps with a small dab of color.

8. Seal the Painted Gourd With a UV Resistant Clear Coat
Once the paint is fully dry, seal it so the powder does not rub off. Jenn uses Krylon UV resistant clear coating, which also slows fading.
Tip: Two light coats work better than one heavy coat, which can run.

9. Compare Gloss and Matte Finishes on the Faux Raku Gourd
Spray a matte coat over the gloss if you want a softer look. The pearly shimmer of the pigments still shows, but the shine no longer competes with it.
Tip: Not sure which you like? Seal one test gourd in gloss and another in matte.
