How to Mix Acrylic Paint Colors
Source: willkempartschool • Full tutorial: www.craftingstepbystep.com/painting/how-to-mix-acrylic-paint-colors
- Difficulty
- Easy
- Hands-on time
- About 15 minutes
- Cost
- About $8 to $15
Tools
- Palette knife
- Palette or scrap paper
Materials
- Acrylic paint in yellow
- Acrylic paint in red
- Acrylic paint in blue
- Titanium white
Steps
1. Find the Hue on the Wheel
Look at the colour you are matching and work out where it sits on the colour wheel. This target is a yellowy orange, so yellow is the closest starting point.

2. Add a Little Red
Bring the yellow toward orange with a small amount of red. Add far less than feels right.
Tip: Red is the strong colour in this pair. A speck moves it a long way.

3. Mix and Compare
Work the two colours together properly, then hold the mix up against the target. At this stage you are only judging the hue.

4. Correct the Value
Now ask whether the mix is lighter or darker than the target. This one is still too light.
Tip: Imagine the two in black and white. That is the value comparison you are making.

5. Squint at It
Hold the mix over the target and squint hard at both. If they merge into a single patch you are close.

6. Knock Back the Saturation
The mix is probably still too bright. Add a tiny amount of the complement - blue, for an orange - to dull it down.
Tip: Be brave and keep mixing. A complement looks alarming going in and settles as it blends.

7. Correct Any Overshoot
If the complement pushes it too green, bring a little red back. Expect to go back and forth.

8. Swatch It and Allow for Drying
Put a swatch of the mix right next to the target, ideally on scrap paper. Acrylic dries darker than it appears wet, so leave the wet mix looking a touch lighter than the target.
Tip: Mix more than you think you need. Matching the same colour twice is harder than mixing enough the first time.
