How to Tie a Macrame Square Knot
Source: Moptop Goods • Full tutorial: www.craftingstepbystep.com/macrame/how-to-do-square-knots
- Difficulty
- Easy
- Hands-on time
- About 20 minutes
- Cost
- About $5 to $10

Tools
- Wooden dowel (3/4 inch or 1 inch)
- S-hooks for hanging the dowel
- Sharp fabric scissors
- Macrame comb (for finishing fringe)
Materials
- Macrame cord (3mm or 4mm single twisted cotton)
- Wooden beads (optional accent)
Steps
1. Mount Your Cords on the Dowel
Hang your dowel between two S-hooks at a comfortable height - eye level when you are seated works well. Cut your macrame cords to length and fold each one in half.
Tip: Cut your cord 4 to 5 times the length of the finished piece. Square knots eat cord faster than you would expect, especially when you are stacking them into a chain.

2. Identify Your Working and Filler Cords
Group 4 strands together. The two on the outside are your working cords - those are the ones that will wrap and tie.

3. Cross the Left Working Cord Over the Fillers
Take your left working cord and lay it across the top of the two filler cords, heading to the right. It should now be sitting over the fillers and pointing toward your right hand.

4. Pass the Right Cord Under and Through
Pick up the right working cord. Pass it behind the two filler cords (so it goes under), and then bring the tail up through the loop you made on the left side in the previous step.
Tip: If you lose track of which cord went where, just look at the loop. The cord that goes under the fillers always comes up through the loop made by the cord that went over.

5. Pull Tight to Lock the First Half
Hold the filler cords steady with one hand and gently pull both working cords outward with the other. Slide the knot up toward the dowel (or up against the previous knot if you are building a chain).

6. Mirror the Knot Going the Other Way
Now you flip the motion. Take the right working cord and lay it OVER the fillers, heading left.
Tip: To check you did it right, look at the front of the knot. A finished square knot has two horizontal bars - one on top from the first half, one on the bottom from the second half.

7. Repeat to Build a Square Knot Chain
Tie another square knot directly under the first one using the same 4 cords. Then another.
