Crafting Step by Step

How to Make a Mosaic Stepping Stone

Source: mosaicsbymaricela • Full tutorial: www.craftingstepbystep.com/crafts/how-to-make-a-mosaic-stepping-stone

Difficulty
Easy
Hands-on time
About 45 minutes
Wait time
24 hours
Cost
About $15 to $25
Makes
1 mosaic stepping stone

Tools

  • mixing bowl
  • spatula
  • wooden mallet
  • grout spreader
  • sponge
  • nitrile gloves
  • sealer brush

Materials

  • concrete stepping stone paver
  • pre-cut ceramic mosaic tiles
  • glass mosaic pieces
  • clear contact paper
  • painters tape
  • pre-mixed thin-set mortar
  • grout
  • grout and tile sealer

Steps

  1. 1. Lay Your Tiles on the Template

    Tape your printed template to the work surface, then cover it with a sheet of clear contact paper, sticky side up. Now the fun part.

    Tip: Your tiles may vary a little in color and size, so just follow the pattern as closely as you can. It does not have to be perfect.

  2. 2. Sandwich the Design in Contact Paper

    Once the layout is done, cut a second piece of contact paper the same size and lay it on top, this time sticky side down. Press firmly across the whole surface so the tiles get pinned between both layers of paper.

  3. 3. Prep the Concrete Paver

    Grab your concrete stepping stone and make sure it is clean, dry, and free of dust. Maricela likes to rinse hers and let it dry all the way through before starting.

  4. 4. Spread the Thin-Set Mortar

    Pour some pre-mixed thin-set into a bowl and keep the rest covered so it does not dry out. Spread an even layer across the whole paver with a spatula.

    Tip: Keeping the tub covered really helps in a warm climate, where thin-set can skin over fast.

  5. 5. Press and Tap the Tiles In

    Lay your tile sheet design side up onto the wet mortar and press it down with your hands first. Then tap gently with a soft wooden mallet, or lay a scrap of wood on top and tap that.

  6. 6. Peel the Paper and Fix Loose Tiles

    The next day, slowly peel off the top layer of contact paper. If a tile or two lift away with it, no problem.

  7. 7. Grout the Mosaic

    Once everything is fully dry, spread grout over the entire surface and push it into every gap between the tiles. You can use a spreader, a plastic card, or your gloved hands.

    Tip: Let the grout haze dry about an hour, then buff it off with a clean cloth. A toothpick clears any stubborn grout off the tile faces.

  8. 8. Seal It and Set It Out

    Let the mosaic cure for 24 to 48 hours, then brush on a thin coat of sealer. Give it a minute, wipe off the extra, and add a second coat if you like, letting it dry in between.

My notes

Scan for the full tutorial and video

Full tutorial with videos and details at www.craftingstepbystep.com/crafts/how-to-make-a-mosaic-stepping-stone