How to Make a Mosaic Flower Pot
Source: First Day of Home • Full tutorial: www.craftingstepbystep.com/crafts/how-to-make-a-mosaic-flower-pot
- Difficulty
- Medium
- Hands-on time
- About 1 hour
- Wait time
- 13 hours 30 minutes
- Cost
- About $10 to $20
- Makes
- 1 mosaic flower pot

Tools
- tile nippers
- safety goggles
- gloves
- putty knife or spreader
- mixing cup
- grout sponge
Materials
- terracotta pot
- thrift-store plate or broken china
- pre-cut mosaic tiles
- tile adhesive
- powdered tile grout
- clay pot sealer
- mosaic tile sealer
Steps
1. Seal the Pot and Gather Supplies
Start with plain terracotta pots. Chrissy seals the inside and outside of each pot with a clay pot sealer first, which helps the finished piece hold up outdoors.
Tip: No plate on hand? Pre-cut mosaic tiles from a craft store work just as well and mix in nicely with plate pieces.

2. Break the Plate with Tile Nippers
Put your safety goggles and gloves on before you break anything. Take your tile nippers and start snapping the plate into smaller pieces.
Tip: Chrissy calls this the best stress relief in the whole project. Take your time and enjoy it.

3. Nip the Pieces Down to Size
Keep nipping until your pieces land around half an inch to three-quarters of an inch. That size lays flat on a small pot and grouts cleanly.

4. Glue the Tiles onto the Pot
Now the design comes together. Spread tile adhesive on the pot and press your pieces on in a pattern.
Tip: Lay a few tiles out dry before gluing so you can see the pattern and count how many border pieces you need.

5. Mix the Grout
Let the adhesive set for about five or six hours, then mix your grout. Chrissy stirs powdered grout with water until it hits a consistency like toothpaste.

6. Spread Grout Over the Tiles
Work the grout over the entire pot with gloved hands, pushing it into every crack and crevice between the tiles. Do not panic when the whole thing disappears under a layer of grout.
Tip: Press firmly so no air pockets hide in the gaps between pieces.

7. Wipe It Clean to Reveal the Design
This is where it gets pretty. Take a sponge that's just barely damp and scrape the grout off the faces of the tiles.

8. Cure, Seal, and Plant
Let the pot cure overnight so the grout sets before you touch it. The next day, buff it with a clean damp cloth to clear any last grout haze.
Tip: Sealing the grout is optional but worth it if the pot lives outdoors year round.
