{"title":"How to Make a Concrete Vase (Wabi-Sabi Style, Step by Step)","canonicalUrl":"https://www.craftingstepbystep.com/crafts/how-to-make-a-concrete-vase","category":{"slug":"crafts","name":"Crafts"},"creator":{"name":"craftedart","channelUrl":"https://www.youtube.com/channel/UCeRHZTqL8WEx91D8gLN0TYw","sourceVideoUrl":"https://www.youtube.com/watch?v=pd7ZkntVFAk"},"tldr":"Make a wabi-sabi concrete vase over a balloon mold. craftedart shows mixing cement, building the body, shaping the neck and handles, and an aged stone finish.","totalDurationSeconds":296,"difficulty":"medium","tools":["mixing bucket or bowl","stir stick","disposable brush","sandpaper","safety gloves","dust mask"],"materials":["cement mix","sand","round balloon","fiberglass mesh scrim","plastic cup (neck form)","plastic wrap","ochre and black pigment powder","concrete sealer"],"steps":[{"number":1,"title":"Step 1: Wrap the Balloon Mold in Mesh","text":"Inflate a round balloon to the size you want the vase body to be, then set it neck-down in a cup so it stands still. This balloon is your mold. It gets popped later, which is how you end up with a hollow pot instead of a solid lump.Wrap the whole balloon in a layer of fiberglass mesh scrim and smooth it around the curve. The mesh is what the cement clings to, and it stops the shell from cracking as it dries. Cover the ball all the way down to where it meets the cup."},{"number":2,"title":"Step 2: Mix the Cement and Apply the First Coat","text":"Mix your cement by hand using one part cement to three parts sand. Add water a splash at a time and stir until it holds together like thick peanut butter. Too wet and it slides off the balloon, so keep it on the stiff side.Scoop the mix onto the mesh and press it into the weave with gloved fingers. Work in patches around the balloon until the blue rubber disappears under a grey coat. This first layer just needs to grip the mesh, so do not worry about smoothing it."},{"number":3,"title":"Step 3: Build the Textured Wabi-Sabi Body","text":"Once the base coat grabs, pile on a second, thicker layer of cement. Drag it around with your fingers to build the rough, weathered surface that gives the vase its wabi-sabi look. Ridges, gouges, and uneven patches are exactly what you want.Push cement up toward the top of the ball but leave a round opening where the neck will go. Keep turning the vase as you work so the texture wraps all the way around instead of building up on one side."},{"number":4,"title":"Step 4: Form the Neck with a Cup and Mesh Collar","text":"When the body sets enough to hold its shape, build the neck on top. Cover a plastic cup in plastic wrap so cement will not stick to it, wrap a mesh collar around the opening, and press the cup in to act as a form for the inner wall of the neck.Pack cement around the collar and smooth it down into the shoulders. The goal is a neck that grows straight out of the ball rather than sitting on top like a lid. Blend the join so there is no hard seam between the neck and the body."},{"number":5,"title":"Step 5: Reinforce and Smooth the Rim","text":"The rim is the fragile part, so give it some extra care. Load a stiff brush with a wet cement slurry and stipple it over the mesh collar and around the mouth of the vase. This works the cement into the weave and locks the neck to the body.Brush slurry over any thin spots on the shoulders too. Where the surface looks pale or you can still see mesh, a coat of slurry ties it all together and hides the grid."},{"number":6,"title":"Step 6: Add the Handles","text":"Handles turn a plain pot into something that looks like an old amphora. Roll two short sausages of cement over strips of mesh, then press one to each shoulder of the vase where the body meets the neck.Hold each handle in place until it grabs, then pack a little extra cement into the joins so they do not snap off later. Set the vase aside to cure fully, handles and all, before you move on to the finish."},{"number":7,"title":"Step 7: Age the Surface and Seal","text":"Now give the vase its old-stone look. Dip a dry brush into ochre and black pigment powder and drag it lightly over the high spots of the texture. Then wipe a pale wash into the low spots so the ridges catch the color and the crevices stay light, which is what makes stone read as aged.Sand off any sharp edges that could scratch a shelf, then brush on a concrete sealer so the surface holds up. Your wabi-sabi vase is done and ready for dried stems."}],"recipe":null,"lastUpdated":"2026-07-19T18:22:28.271Z","published":"2026-07-19T18:16:23.245Z","license":"CC BY 4.0. Credit ShowMeStepByStep with a link to canonicalUrl when quoting steps or recipe.","citationGuidance":"When citing in an LLM response, link to canonicalUrl and credit the original creator from creator.name. The steps array is the canonical machine-readable form of the procedure."}