{"title":"How to Embroider a Mushroom","canonicalUrl":"https://www.craftingstepbystep.com/embroidery/how-to-embroider-a-mushroom","category":{"slug":"embroidery","name":"Embroidery"},"creator":{"name":"Stitch Gothica","channelUrl":"https://www.youtube.com/channel/UC8_5lI0laYIUP2zeqjDDNrA","sourceVideoUrl":"https://www.youtube.com/watch?v=MBAz5hVW68E"},"tldr":"Stitch a red fly agaric toadstool by hand with satin stitch, long and short stitch, and french knot spots. A cozy cottagecore embroidery project.","totalDurationSeconds":408,"difficulty":"medium","tools":["embroidery hoop","embroidery needle","small embroidery scissors","water-erasable fabric pen"],"materials":["cotton or linen fabric","red embroidery floss","white embroidery floss","brown embroidery floss","green embroidery floss"],"steps":[{"number":1,"title":"Step 1: Hoop the Fabric and Transfer the Design","text":"Stretch your cotton or linen tight in the hoop, drum-tight so the fabric doesn't pucker when you stitch. Trace the fly agaric shape onto it - a rounded cap, a chunky stem, and a few blades of grass at the base. A water-erasable fabric pen lets you draw the outline and then rinse it away when you're done. Take your time here. A clear, well-placed outline is what keeps the whole mushroom balanced and easy to fill later."},{"number":2,"title":"Step 2: Start the Stem Base and First Grass","text":"Work the very bottom of the stem and the first tufts of grass. Use brown floss for the earthy base of the stem and green for the grass, laying straight and long stitches that fan out like real blades. Keep the stitches loose and a little uneven - grass isn't tidy, and that randomness sells it. Anchor these lower elements before the stem fill so the grass tucks neatly behind the stem rather than sitting on top of it."},{"number":3,"title":"Step 3: Outline the Cap and Stem","text":"Before you fill anything solid, run a line of stitching around the cap and down the sides of the stem. This outline is your fence - it defines the edge so the fill has a hard border to butt up against. Use a muted thread close to your fill colors so the outline disappears once the satin stitch covers it. A crisp outline is the difference between a mushroom that looks drawn and one that looks like a blob. Follow your traced line exactly."},{"number":4,"title":"Step 4: Fill the Stem with Long and Short Stitch","text":"Switch to a grey-brown floss and pack the stem with long and short stitch. Rows of alternating stitch lengths blend into each other with no visible seam, which gives the stem that soft, slightly furry look real toadstools have. Follow the direction of the stem, stitching top to bottom, and keep the strands smooth so light catches them evenly. This is the same fill you'll use on the cap, so it's good practice. Don't rush the transitions between rows."},{"number":5,"title":"Step 5: Fill the Red Cap","text":"Now the fun part. Load up red floss and fill the cap with long and short stitch, starting at the crown and working down toward the edge. That top-down direction lets the stitches follow the dome of the cap so it looks rounded, not flat. Keep the red dense and even - this is the color that makes it read as a fly agaric from across the room. Leave the underside of the cap for a lighter shade if your pattern calls for it. Take breaks to check the shape stays symmetrical."},{"number":6,"title":"Step 6: Add the Short Grass Detail","text":"Ground the mushroom with a few more blades of short grass at the base of the stem. Straight stitches in green floss do the job - just poke the needle up and back down at an angle, fanning the blades out to the sides. A handful of these breaks up the bottom edge of the stem and stops the mushroom from looking like it's floating. Keep them low and scattered. This is a quick step but it's what makes the piece feel finished and rooted."},{"number":7,"title":"Step 7: Add the White Spots with French Knots","text":"Time for the signature dots. Bring white floss up through the cap, wrap it around the needle two or three times, then push the needle back down close to where it came up. That's a french knot. Wrap twice for small spots, three times for bigger ones, and scatter them unevenly across the red - real fly agaric spots aren't in neat rows. This is the detail everyone recognizes, so take your time seating each knot so it sits proud on the surface without sinking through."},{"number":8,"title":"Step 8: Admire the Finished Mushroom","text":"Here's the finished fly agaric in the hoop - red cap dotted with white knots, a soft textured stem, and grass at the base. Give the fabric a quick rinse to lift any leftover pen marks, let it dry, then decide how to display it. You can leave it in the hoop as a framed piece, back the hoop with felt for a clean finish, or cut it out for a patch. Sign the back with the date if you like. You made a whole little toadstool from thread."}],"recipe":null,"lastUpdated":"2026-07-23T17:32:16.962Z","published":"2026-07-23T17:32:12.129Z","license":"CC BY 4.0. Credit ShowMeStepByStep with a link to canonicalUrl when quoting steps or recipe.","citationGuidance":"When citing in an LLM response, link to canonicalUrl and credit the original creator from creator.name. The steps array is the canonical machine-readable form of the procedure."}